The Ghost Immobiliser
Immobilisers are a potent tool to fight vehicle theft. They stop the vehicle from starting if it does not have a key fob. They also help to stop hotwiring or traditional types of vehicle theft. Innovative methods like relay theft or key cloning are becoming more prevalent.
The Ghost Immobiliser was designed to fight these trends and make your car inaccessible. It doesn't use LED indications radio signals, key fobs. It is silent and discreet.
Easy to install
The Ghost Immobiliser is a revolutionary device that connects to the CAN data network in your vehicle to stop key cloning and theft. It is a TASSA approved product, and is endorsed by insurance companies. It is almost undetectable by thieves and operates quietly. It makes use of buttons on your steering wheel, the centre console and door panels to create a unique pin code sequence that must be entered before you are able to start your vehicle. You can create up to 20 different sequences to increase security. The system is easy to install and doesn't require any additional hardware or wiring.
To ensure the highest quality results it is recommended you choose a reputable CAN-immobiliser installer who is specialized in your vehicle type. Ideally, they will have a workshop in your local area to enable you to visit and have the installation completed. There is also various tools and equipment that can assist you in the installation. These include basic hand tools, a multimeter, and insulation tape and heat shrink tubing to secure connections. A user's manual will give instructions specific to the wiring in your vehicle.
Before beginning the installation, disconnect the battery to prevent short circuits and airbag deployment. It is crucial to confirm the location of the CAN H and CAN L wires, as an incorrect identification could result in unintentional system integration. It is also a good idea to mark the wires using tiny pieces of tape or mark them with labels. Finally, utilize a multimeter for verification that the power source you have identified is able to provide a consistent 12V power supply.
Advanced thieves employ a variety of strategies to get around Ghost Immobilisers, including blocking or spoofing. These methods work by amplifying the signal that is transmitted from your key fob to the electronic control unit of your vehicle. With advanced anti-jamming techniques and a constant monitoring system your vehicle will be protected from these sophisticated attacks.
Security Enhanced
Ghost immobilisers are an additional layer of protection to your car against theft. It is a PIN protection system that can be entered by pressing buttons on your dashboard or steering wheel making it difficult for thieves to take your vehicle. The device is designed to be hidden within your vehicle. It does not have lights or other indicators to alert burglars to its presence. It communicates directly with the ECU of your car through the data bus. This means it is not susceptible to relay attacks or hacking.
The system is an excellent investment for those who own high-end vehicles, as they are at a higher risk of theft because of their value and popularity. Learn Additional enhanced security features guard against key copying, ECU swapping, and other threats to your car's security. Ghost immobilisers can be paired with an app, so that you can easily arm and disarm them. They can also be equipped with an option for service/valet that allows you to temporarily deactivate them while your vehicle is being repaired or serviced.
Ghost immobilisers have another wonderful benefit: it doesn't require any wire cutting. This is a great option, particularly if your car is newer and doesn't come with an immobiliser. Some systems may also be able to integrate with the GPS tracking device, providing an additional layer of security to your vehicle. Having a GPS tracker can help to reduce the cost of insurance. If you decide to purchase a ghost immobiliser make sure it is TASSA-verified and that an experienced installer installs the device for you.
Compatible with all major brands and models
The Ghost Immobiliser has been designed to be compatible with all major makes and models of vehicles that will protect your pride and joy against theft. It generates a unique pin code using buttons on your steering wheel, console or door panels. You must enter this code before you can drive. The system is secure, undetectable, and backed by three-year warranty. It is also fully approved by insurance companies. This means you can lower your insurance costs.
Unlike the standard immobilisers, which make use of the key fob of your car to control the car's ignition, the Ghost system operates by directly connecting to the engine controller unit through the CAN data bus. This means it's impervious to tampering, and is virtually impossible to disable or remove and is not hacked by organised car thief gangs. The Ghost system can also be linked to an iPhone app to allow remote monitoring and management.
You can set a PIN code that is easy to remember, yet mathematically impossible for thieves to determine. You can customize and change the PIN at anytime to keep your vehicle secure even when it's located in a parking lot or on the street. You can also select a valet or service mode if you need someone other than you to drive your car for a brief period such as when it's in the garage for maintenance. This feature is also an excellent way to stop your vehicle from being stolen by a scammer mechanic. You can opt for a Ghost Call alert to give you more peace of mind. It will inform you when your car is moving or has been moved.
Convenience
The ghost immobiliser is an effective security device that protects your vehicle from common theft methods such as key cloning and relay attacks. It connects to the car's CAN network and blocking communication with the engine ECU. This makes it impossible for thieves to duplicate or hack your vehicle, which makes the installation of this system a great idea for all drivers.
Once the system is installed, you'll have to enter a PIN code up to 20 digits using the buttons on your dashboard or steering wheel to begin the engine. The system is completely concealed and unnoticeable to thieves because it does not emit any radio frequency signals. It can also be configured to allow change the PIN of the user, which further adds to its security. The system is also designed to stop circuit cutting which makes it nearly impossible to hack into.
If you do get lost in your PIN, there are some systems that allow you to communicate with the immobiliser using an app on your phone, disarming it instantly. Some systems even have a valet/service setting that allows you to temporarily to start your car, for instance, if you drop it off at Valet Park or a garage.
The Ghost Immobiliser is also undetectable by thieves, since it does not transmit radio signals. This is a major advantage over other security products that are available from the aftermarket. Additionally, it is easy to use and does not require any complex wiring. It can be used in combination with dash cams to provide additional security. This dash cam is the Thinkware F70, which features clear and sharp HD 1080p dashcam footage and Format Free Technology and parking mode. The system can also be wired for maximum performance and durability.
Installation
It is crucial to select the best immobiliser ghost to shield your vehicle from thieves. This device can prevent car thefts by preventing the communication between key fobs and the engine controller unit. This device prevents thieves from intercepting and cloning the signal used to start your vehicle. It also detects if it has been tampered and notify the owner of the vehicle.
The device is easy to install and connects to your vehicle's existing systems. It does not require any modification to the vehicle's wiring and can be concealed in a concealed location, such as under the dashboard. Follow the directions in the manual to ensure that the device is properly installed. After installation, it's important to test the system. This will ensure that the immobiliser ghost works as intended.
You can purchase an Autowatch Ghost 2 Immobiliser from a certified installer and have it installed in your vehicle. The installer will connect Ghost to your vehicle's CAN Bus system, making it difficult for thieves to take over the system or bypass it. Installation generally takes between 2 and 3 hours.
It is recommended to review the wiring diagram for your vehicle prior to the installation process. This will help you find the CAN High and the CAN Low wires required to connect your Ghost to the engine of your vehicle. It is also crucial to verify the connections to ensure that they are secure and properly insulated.
Once the installation is completed, you can start using the Ghost Immobiliser normally. It will shut off the ignition of your vehicle if it is not started with the correct PIN code, which you can set yourself. The immobiliser ghost can be set to Service/Valet Mode for when you need your vehicle to be serviced or valet-parked.